Fill the Void II – Solder Voiding Solutions Video

Voids in solder joints plague many electronics manufacturers. Do you have voids in your life? We have good news for you, there are many excellent ways to “Fill the Void.” This paper is a continuation of previous work on voiding in which the following variables were studied: water soluble lead-free solder pastes, a variety of stencil designs, and reflow profiles. Quad Flat No-Lead (QFN) component thermal pads were used as the test vehicle. The voiding results were summarized and recommendations were made for reduction of voiding. Speaker: FCT Field Application Engineer, Tony Lentz

About Tony Lentz

Tony Lentz has worked in the electronics industry since 1994. He worked as a process engineer at a circuit board manufacturer for 5 years. Over the last 14 years, Tony has worked for FCT as a chemical laboratory manager and facility manager. Tony has extensive experience doing research and development, quality control, and technical service with products used to manufacture and assemble printed circuit boards. Tony has been involved with APEX for many years. He holds B.S. and M.B.S. degrees in Chemistry.