TACKY SOLDER FLUX

Attributes
Flux Type
Alloys
Halogen
Classification
NC26
No Clean
Lead Free
No
ROL0
NC27
No Clean
Lead Free
Yes
ROL0
NC32
No Clean
Lead Free
No
ROL0
WS89
Water Soluble
Lead Free
Yes
ORH1
NC26 tacky flux gel is a no clean tacky dispensing flux ideally suited for BGA and surface mount component repairs. It leaves a clear colorless residue which does not require cleaning. This product is completely halogen free. NC26 is classified ROL0.

Attributes
  • Excellent tack with minimal change over time and humidity
  • Suitable for dispensing, printing, and pin transfer
  • Excellent SMT rework flux offering bright shiny solder joints with clear probable residue
  • Excellent wetting on all surface finishes
  • Halogen free
NC27 tacky flux gel is a no clean tacky dispensing flux ideally suited for BGA and surface mount component repairs. NC27 is formulated to give more activity than NC26. It leaves a clear colorless residue which does not require cleaning. This product is halide free. NC27 is designed for a wide range of temperature and humidity conditions with a stencil life greater than 8 hours. NC27 is classified ROL0.

Attributes
  • Stable product with long stencil life
  • Highly active
  • Excellent printing characteristics
  • Suitable for dispensing, stencil printing, and pin transfer
  • Excellent SMT rework flux offering shiny solder joints with clear probable residue
NC32 tacky flux gel is a no clean, halogen free tacky dispensing flux ideally suited for BGA and surface mount component repairs. It leaves a clear colorless residue which can be cleaned with a suitable cleaning agent. NC32 is classified ROL0 and is suitable for dispensing, stencil printing, and pin transfer. This product is also useful if one is looking to clean a no clean repair flux.

Attributes
  • No clean flux that is cleanable with suitable chemistry
  • Suitable for BGA repair
  • Suitable for dispensing, stencil printing, and pin transfer
  • Excellent SMT rework flux
  • Halogen free
WS89 tacky flux gel is a water soluble tacky dispensing flux ideally suited for BGA and surface mount component repairs, as well as, dispensing, stencil printing, and pin transfer. It leaves a dark residue which can be easily cleaned with water. WS89 is classified ORH1.

Attributes
  • Completely water soluble
  • Dark, visible residue that is easily cleanable

Want to find out more or get a sample?

* These fields are required.